#WFOH-D radiant heat wire is a twin-conductor constant wattage heating cable, and it uses low-smoke halogen-free material as its outer jacket.
Approved By:
Jiahong #WFOH-D Radiant Heat Wire is a twin-conductor constant wattage heating cable, and its outer diameter is about 5mm. It adopts low-smoke halogen-free material as its outer jacket, which will comply with the strict eco-friendly policy.
We offer two different types: 10w/m and 20w/m. You can custom power, length, materials, cable printing, even packing types based on your requests.
Jiahong #WFOH-D Radiant Heat Wire is usually used in an electric floor heating system, or ground freeze protection system as a safe heater. It is also used in a concrete wall or road to make it dry fast.
No matter which places you want to use it, it will provide a stable electric heating solution in not less than 25 years.
All #WFOH-D Radiant Heat Wires will be made according to CE and EAC safe standards. And we already passed the third part test and got the reports of CE, EAC, and GOST.
Contact us now!
Description
Datasheet
As a regular constant wattage heating cable, #WFOH-D Radiant Heat Wire also adopts a four-layer structure.
Tinned Copper Conductor
Twin-conductor structure and cable heats up through the conductor;
Inner Insulation
Braiding Layer
Made of Tinned Copper braid, it will absorb 100% electromagnetic radiation.
Protection Layer
Made of Low-smoke halogen-free material, waterproof, support wet place uses;
We will offer a 2.5m cold lead to all cables and we will assembly them first and packed with a tray. If you need an extra color box with your design, you can discuss the details with us.
| Cable Construction | Twin Conductor |
| Rated Voltage | 230v |
| Output | 20w/m ± 10% |
| Heating Element Size | 10~155m |
| Bending Radius | 50mm |
| Cable Diameter | 4.8mm~5.6mm |
| Conductor Insulation | XLPE |
| Outer Insulation | LSZH |
| Max. Ambient Temperature | 85°F(30℃) |
| Min. Installation Temperature | 40°F(5℃) |
| Cold Lead | 2.5m Length |
Special Request
Contact Us
