HTLE Self Regulating Heat Trace Cable

  • Energy Efficiency Automatically Varies with Power Output in Response to Pipe Temperature Changes;
  • PTC Core Materials Are Made By Ourselves;
  • Lower Installation Cost and Maintenance Expense Compared to Steam Heat Tracing;
  • Cut-to-length according to practical requirements on site
  • No Overheat or burnout Even when Wrapped Over Itself(Overlapped);
  • Jiahong Provides Power Connection, Splice, Tee, End Seal Kits, and other Related Accessories;
  • Suitable for use in Non-hazardous, Hazardous and Corrosive Environments;

Jiahong’s Self Regulating Heat Trace Cable

Jiahong Self Regulating Heat Trace Cable is a professional-grade low-temperature self-regulating heating cable. It regulates its power output by itself in response to the pipe temperature change. When the ambient temperature rises, the amount of heat and power decreases. However, when the ambient temperature drops, the amount of heat and power increases. Jiahong Self Regulating Heat Trace Cable is designed to provide freeze protection for non-metallic pipe, roof and gutter deicing for residential and commercial locations. It is widely used in factories, offices, families and pets’ room, etc. Jiahong Self Regulating Heat Trace Cable can withstand continuous exposure (maintain) capability up to 150°F (65°C) and intermittent exposure capability up to 185°F (85°C). The cable is suitable for use in supply voltages of both 110-120 VAC and 208-277 Vac. There are five popular models in the markets: 3 Watts per ft. (10w/m), 5 Watts per ft. (17w/m), 6 Watts per ft. (20w/m), 8 Watts per ft. (25w/m) and 10 Watts per ft. (33w/m). With over 25 years of experience in developing and manufacturing, Jiahong is the only manufacturer in China who can make this super temperature self-regulating heating cable. All Self Regulating Heat Trace Cables are approved by CE, ATEX, IECEX, and EAC. The Cables are popular in Europe.

Why Future Jiahong’s Self Regulating Heat Trace Cable

  • No.1 Heating Cable Exporter in Asia-Pacific
  • Over 25 Years of Manufacturing Experience
  • The only manufacturer who holds the Core Technologies in China
  • Complete Test Reports For Europe And America
  • One Stop Source and Accessories supports
  • 10 Years Warranty Services

Self Regulating Heat Trace Cable

 

Jiahong Self Regulating Heat Trace Cable is a professional-grade low-temperature self-regulating heating cable.

It is designed to provide freeze protection for non-metallic pipe, roof and gutter deicing for residential and commercial locations.

This kind of heating cable is configured for use in both non-hazardous and hazardous (classified) locations, including areas where corrosives may be present.

It is widely applied to factories, offices, families and pets’ room, etc.   Jiahong Self Regulating Heat Trace Cable shall have continuous exposure (maintain) capability up to 150°F (65°C) and intermittent exposure capability up to 185°F (85°C).

Residential Pipe and roof heating cable Power Output Curve

The cable is suitable for use on supply voltages of both 110-120 VAC and 208-277 VAC. There are five popular models in the markets: 3 Watts per ft. (10w/m), 5 Watts per ft. (17w/m), 6 Watts per ft. (20w/m), 8 Watts per ft. (25w/m) and 10 Watts per ft. (33w/m).  

Maximum circuit length (in feet) per circuit breaker
 Ambient temperature at start-up120V240V
15A20A30A40A15A20A30A40A
3HTLe50℉10℃330330330330660660660660
32℉0℃330330330330660660660660
14℉–10℃270280330330540560660660
0℉–18℃200265330330395530660660
–20℉–29℃175235330330350465660660
–40℉–40℃155205310330310410620660
5HTLe50℉10℃230270270270460540540540
32℉0℃230270270270460540540540
14℉–10℃180210270270360420540540
0℉–18℃140190270270285380540540
–20℉–29℃125165250270250330500540
–40℉–40℃110145220270220295440540
6HTLe50℉10℃200235245245405470490490
32℉0℃200235245245405470490490
14℉–10℃160200235245320400475490
0℉–18℃125170135245255340475490
–20℉–29℃110150220245225300440490
–40℉–40℃100130195240195260400480
8HTLe50℉10℃150200210210300400420420
32℉0℃150200210210300400420420
14℉–10℃140150205210280300410420
0℉–18℃100130200210200265400420
–20℉–29℃85115175210175235350420
–40℉–40℃80105155210155210315420
10HTLe50℉10℃120160180180240315360360
32℉0℃105140170180210280340360
14℉–10℃95125165180190250330360
0℉–18℃80110160180160215325360
–20℉–29℃7095140180145190285360
–40℉–40℃6085125170125170255340

Every Jiahong Self Regulating Heat Trace Cable has a self-regulating characteristic.

Its power output self-regulates in response to the pipe temperature. When the ambient temperature rises, the amount of heat and power decreases.

However, when the ambient temperature drops, the amount of heat and power increases.

This self-regulating characteristic improves safety and reliability.

The cable would not overheat or burnout, even when overlapped upon itself.

It can be cut-to-length at the site to match exact piping lengths without any complicated design considerations. Because of this feature, this cable does not require an additional thermostat.  

Jiahong Self Regulating Heat Trace Cable is a flat heating cable with two parallel conductors.

It includes Nickel-plated copper bus wires (16 AWG), Semiconductive heating matrix and thermoplastic elastomer dielectric insulation, tinned copper braid, and thermoplastic over the jacket.

Inner bus wire adopts the same materials as brands’ in Europe. The semiconductive heating matrix is developed by ourselves, which has served our brands’ customers for over 15 years.

And Jiahong is one of the manufacturers who can individually develop and make these materials.

Tinned copper braid is ductile, yet it withstands high mechanical loads, thus averting damage when installing in arduous environments.

Outer Jacket is made of the PVC or other UV protection thermoplastic elastomer, which provides additional protection to the cable and braid against certain inorganic chemical solutions.  

Jiahong Self Regulating Heat Trace Cable is energy efficiency. Its self-regulating core generates heat when and where it’s needed.

The core continuously adjusts its heat output to the environment at every point along the heating cable, thus reducing the overall energy costs for the season. 

Jiahong Self Regulating Heat Trace Cable is easy and simple to install. It only needs to be laid along the pipe. 

Not any special skill and tools are required. Meanwhile, all necessary accessories such as termination, splicing, and power connection components are provided in our convenient kits as well.  

All Jiahong Self Regulating Heat Trace Cables must pass the set standards by the international quality testing institutes.

The heating cables for North America markets passed UL, CULus, CSA, ETL and the heating cables for Europe markets passed CE, TUV, ATEX, IECEX, and EAC.

Meanwhile, all Jiahong Self Regulating Heat Trace Cable comes with a 10-year warranty, which is the longest in the industry.  

Jiahong Self Regulating Heat Trace Cable is generally packed in wooden spools or plastic spools. Normally it is delivered at 250ft, 500ft and 1000ft a spool.

Customers could cut the required length according to practical requests.

You can also have your company information printed on cable and customize your package.

Our design department is glad to help you.   To improve Jiahong Self Regulating Heat Trace Cable, our technology team continuously cooperates with experienced experts and brands’ such as Raychem.

We’re still the only supplier who owns the complete certificates and most product patents. We believe that more and more heating trace goes to self-regulating cable, it’s an overwhelming trend.